Mobile Phone (GUM-326)

Product Description

Network: EGSM900/DCS1800 Dual Band
Dimensions: 135mm x 58.5mm x 16mm
Weight: 111 g (including battery)
Talk time: about 2.0~2.5 hours, subject to network and usage conditions
Standby: about 150~200 hours
Battery: 700 mAh Li battery

Communication control keys
The Calling key is used to make a call (after a number has been entered or selected from the phonebook) and also to answer an incoming call. In the standby mode, press the key to display recent calls. When in talking mode, you can enter hands free mode by press calling key.
The Ending key is used to end a call (when calling or during conversation) or to quit the menu and return to standby mode. Holding the key down can switch on/off the phone.
When the handset is not in standby mode you can return to standby mode by pressing the ending key.
When in talking mode, press Side Key A to increase the volume, press Side Key B to decrease the volume.
Memory key, Menu key and Numeric key
Memory Key
Memory keys from M1 to M4 are used to set the speed-dialing numbers.
If want to reset the speed-dialing numbers of M1 to M4, just input the new numbers and store them again. The original numbers will be replaced automatically.

The length of a speed-dial number does not go over 16 digits.
Menu Key
Menu key is used to enter some functions: Phone Book, Ring Tone Settings, and Time and Date Settings. It is also used to set the parameters or confirm an operation.
Numeric Key
Numeric keys from 0 to 9 and symbol keys * and # are used to input the number or password.
Pressing "*" key in standby mode can input "+" or "P" or "W" symbol.
Pressing and holding "*" key for more than two seconds in standby mode can lock the keypad; Pressing and holding this key for another two seconds can unlock the keypad.
Pressing and holding "#" key for more than two seconds in standby mode can enable the silent function; Pressing and holding this key for another two seconds can resume the previous mode. The headset mode will be activated after you connect the headset to the phone. Press and hold the "#" key for more than two seconds to switch the incoming call prompt types of "Ring only", "Vibration only" and"Vibration and ring".